Switch命令大全是什么?
??1。在基于IOS的交換機上設置主機名/系統(tǒng)名:switch(config)# hostname hostname 在基于CLI的交換機上設置主機名/系統(tǒng)名: switch(enable) set system name name-string 2。
??在基于IOS的交換機上設置登錄口令: switch(config)# enable password level 1 password 在基于CLI的交換機上設置登錄口令: switch(enable) set password switch(enable) set enalbepass 3。
??在基于IOS的交換機上設置遠程訪問: switch(config)# interface vlan 1 switch(config-if)# ip address ip-address netmask switch(config-if)# ip default-gateway ip-address 在基于CLI的交換機上設置遠程訪問: switch(enable) set interface sc0 ip-address netmask broadcast-address switch(enable) set interface sc0 vlan switch(enable) set ip route default gateway 4。
??在基于IOS的交換機上啟用和瀏覽CDP信息: switch(config-if)# cdp enable switch(config-if)# no cdp enable 為了查看Cisco鄰接設備的CDP通告信息: switch# show cdp interface [type modle/port] switch# show cdp neighbors [type module/port] [detail] 在基于CLI的交換機上啟用和瀏覽CDP信息: switch(enable) set cdp {enable|disable} module/port 為了查看Cisco鄰接設備的CDP通告信息: switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]。
??
強推





